Biaxial, Triaxial, Quadraxial and Unidirectional Stitched Fiberglass
$0.50/lb for any combination of whole pallets 10,000 pounds and up
$0.70/lb for any combination whole pallets 2,000 to 9,999 pounds
The following prices are for any combination of whole rolls any styles
$0.85/pound for any whole rolls 2,000 pounds and up
$0.95/pound whole rolls 1000 to 1,999 pounds
$1.35/pound any whole rolls 500 to 999 pounds
$1.70/pound any whole rolls 250 to 499 pounds
$2.00/pound any whole rolls up to 249 pounds
above prices for rolls we have in stock plus shipping save shipping and pick up right here in High Point, NC
The list below is kept accurate - for quotes and specific weights email us at email@example.com, use the contact form, or call us at 800-218-1375
Vectorply® Inventory list with descriptions - over 100,000 pounds in stock
0°: Longitudinal or warp direction - lengthwise down the roll of material
+ 45°: Relative to the 0° orientation
- 45°: Mirror orientation of +45° relative to 0° orientation
90°: Transverse, side to side or fill direction
oz: *anywhere you see "oz" it means ounces per square yard or oz/sq yd - oz/sq ft is not used anywhere - locations such as (loc C14) are for our own use so we can use this same list in locating the rolls.
T-Spec: our inference, or guess, from Vectorply nomenclature and similar styles - not
to be taken as exact specs.
V-Spec: Vectorply® specs for individual styles published on the internet transposed by us
List is in order of 0/90 biax, 45/45 biax, Triax, Quadrax and Unidirectional and in order of increasing overall weight (oz/sq yd)
0/90 Biaxial Fiberglass
listed in order by increasing overall weight (oz/sq yd)
E-LT 1100-14P x 50" 0/90 Biaxial Fiberglass - lots of small rolls - all in original boxes but may be repacked to save weight
(T-Spec: 37 oz/sq yd overall with Most of the glass in the 0° or warp direction with some in the + 45° and - 45°)
20,359 lbs. of mostly 350 lb rolls.
Thayercraft, Inc is not a distributor of or affiliated with the Vectorply® Corporation in any way and is just in possession of surplus material selling it as is. All material is guaranteed to be in good condition with suitable finishes for thermosetting resins. Material is surplus and not junk. Prices are a one shot deal and in no way to be used as an expectation of ongoing pricing.